Viscosity measurements of CO2-in-water foam with dodecyl polypropoxy sulfate surfactants for enhanced oil recovery application

초록

Apparent viscosities of CO2-in-water foams were measured in a wide range of shear rate from 50 to 10 5 inverse second for enhanced oil recovery (EOR) application. The CO2-in-water dispersions, made of 50: 50 weight proportions of CO2 and water with 1 wt.% surfactant concentration, were prepared in high-pressure recirculation apparatus under pressure where CO2 density becomes 0.7, 0.8, and 0.9 g/mL at each temperature of 35, 45, and 55 degrees C. The surfactants used for the foam generation were sodium dodecyl poly-propoxy sulfates with average propoxylation degrees of 4.7 and 6.2. The foam viscosity showed shear thinning behaviors with power-law indices ranging from 0.80 to 0.85, and approached a Newtonian regime in the lower shear rate range at several tens of inverse second. Zero-shear viscosity values projected from experimental data based on Ellis model were as high as 57.4 mPa.s and enough to control the mobility of water and CO2 in oil reservoirs.

키워드