Effect of Cu addition on the martensitic transformation of powder metallurgy processed Ti-Ni alloys

초록

Ti50Ni50 and Ti50Ni50Cu20 powders were prepared by gas atomization and their transformation behaviors were examined by means of differential scanning calorimetry and X-ray diffraction. One-step B2-B19' transformation occurred in TisoNiso powders, while Ti50Ni50Cu20 powders showed B2-B19 transformation behavior. Porous bulks with 24% porosity were fabricated by spark plasma sintering. The martensitic transformation start temperature (50 degrees C) of Ti50Ni50 porous bulk is much higher than that (22 degrees C) of the as-solidified powders. However, the martensitic transformation start temperature (35 degrees C) of TisolVisoCuzo porous bulk is almost the same as that (33 degrees C) of the powders. When the specimens were compressed to the strain of 8% and then unloaded, the residual strains of Ti50Ni50 and Ti50Ni50Cu20 alloy bulks were 3.95 and 3.7%, respectively. However, these residual strains were recovered up to 1.7% after heating by the shape memory phenomenon. (C) 2014 Elsevier Ltd. All rights reserved.

키워드