Design of Broadband Quasi-Yagi Antenna Using a Folded Dipole Driver

Design of Broadband Quasi-Yagi Antenna Using a Folded Dipole Driver

초록

This paper describes the development of a broadband quasi-Yagi antenna using a folded dipole driver. The antenna is designed on a low-permittivity substrate to reduce the surface wave effect, and hence the gain can be enhanced easily by adding directors. The folded dipole driver is connected to a 50-Ω microstripline via a simple broadband microstrip-to-coplanar stripline transition with a quarter radial stub. The key motivation for the use of a folded dipole is to increase the input impedance at the driver, allowing a smaller mismatch loss between the antenna driver and the coplanar stripline feed. The proposed antenna has a measured bandwidth of 4.67~6.26 GHz for the —10 dB reflection coefficient, and a flat gain of 4.86~5.15 dB within the bandwidth.

키워드

Broadband; Quasi-Yagi Antenna; Folded-Dipole.
제목
Design of Broadband Quasi-Yagi Antenna Using a Folded Dipole Driver
제목 (타언어)
Design of Broadband Quasi-Yagi Antenna Using a Folded Dipole Driver
저자
Son Xuat Ta; 김병철; 추호성; 박익모
발행일
2011
저널명
Journal of Electromagnetic Engineering and Science
권
11
호
3
페이지
227 ~ 232