Micro-forming of Zr65Al10Ni10Cu15 metallic glasses under superplastic condition

초록

Micro-formability behavior of the Zr65Al10Ni10Cu15 alloy sheet fabricated by using squeeze casting method, which exhibited Newtonian behavior in the supercooled liquid region, was examined by finite element methods and experiments. In micro-forming simulation on a single V-groove, micro-formability index increased with time and nearly completed die-filling was achieved in 100 s when deformed under a constant pressure of 52.6 MPa at 696 K. In micro-forming on the die with multiple V-grooves in array along its width, the degree of die-filling was predicted to depend on the V-groove position. The V-grooves near the center of the die exhibited the high degree filling ratio of similar to 1 but it was only similar to 0.1 near the free end. This trend was confirmed to agree with the experimental results. According to the simulation result, higher friction coefficient and longer loading time could improve the die-filling ability near the free end. (C) 2008 Elsevier B.V. All rights reserved.

키워드